Products
         

        E-Glass Chopped Strand Mat

        E-Glass Woven Roving
        Filament Winding Process
        Pultrusion Process
        Weaving Process
        Direct Roving for LFT-D/G
        Centrifugal Casting Process
        Bulk molding Compound Process
        Sheet Molding Compound Process
        Chopped Strand Mat Production Process
        Continuous Sheet Production Process
        Spray Up Process
        Chopped Strands for Thermoplastics

         

        Fiberglass Woven Roving
        Fiberglass Stitched Mat
        Fiberglass Multi-axial Stitched Fabric
        Automotive interior mat
        General mat

         

         

        E-Glass Woven Roving

        E-Glass Woven Rovings are bidirectional fabric made by interweaving direct roving.

        E-Glass Woven Rovings are compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins.

         

        【Product Features】

        Warp and weft roving align in a parallel and flat manner, resulting in uniform tension densely aligned fibers, resulting in high dimensional stability and making handling easy good moldability, fast and complete wet out in resins, resulting in high productivity Good mechanical properties and high strength of parts.

         

        【product application】
        E-Glass Woven Roving is a high-performance reinforcement widely used in hand lay-up and robot processes to manufacture boats, vessels, plane and automotive parts, furniture and sports facilities etc.
        【Product List】

        Product Code

        Radial Density (ends/cm)

        Latitudinal Density (ends/cm)

        Radial Strengt(N)

        Latitudinalg Strength(N)

        Area Weight g/m2

        EWR300

        5.4±0.5

        4.8±0.5 

        1800

        1500

        300±30

        EWR500

        4±0.4

        3.2±0.4 

        2500

        2200

        500±20

        EWR600

        2.8±0.3

        2.2±0.2

         4000

        3850

        600±20

        EWR800

        1.8±0.2

        1.8±0.2

        4500

        4200

        800±20

        Other special products need to book in advance.

        Technical Specification

        E-Glass Woven Roving
        【parameters】

        type

        Thickness(mm)

        Thickness(mm)

        RD

        LD

        Area Weight (g/m2)

        Length  (m)

        Roll weight
        (kg)

        Width
        (cm)

        EWR300

        0.2

        5.4±0.5

        4.8±0.5

        300

        90-120

        30-35

        90-125

        EWR500

        0.4

        4.0±0.4 

        3.2±0.4

        500

        60-120

        30-40

        90-125

        EWR600

        0.6

        2.8±0.3

        2.2±0.2

        600

        50-120

        40-60

        90-125

        EWR800

        0.8

        1.8±0.2 

        1.8±0.2 

        800

        35-120

        40-60

        90-125

        【Breaking Strength】

        Product Code

        RD  Strength≥(N)

        LD  Strength≥(N)

        Area Weight deviation(%)

        EWR300

        1800

        1500

        300±30

        EWR400

        2500

        2200

        400±40

        EWR600

        4000

        3850

        600±50

        EWR800

        4500

        4200

        800±60

        【Moisture and Combustible Content】

        Product Code

        Moisture Content(%)

        Combustible Content(%)

        EWR300

        ≤0.15

        0.40~0.80

        EWR400

        ≤0.15

        0.40~0.80

        EWR600

        ≤0.15

        0.40~0.80

        EWR800

        ≤0.15

        0.40~0.80

        【Packaging】
        Woven Rovings are wound onto a paper tube which has an inside diameter of 89mm, and the roll has a diameter of 260mm. The roll is wrapped up with plastic film, and then packed in a cardboard box or wrapped up with kraft
        paper. The rolls are to be horizontally placed. For transportation the rolls can be loaded into a container directly or on pallets.
        【Storage】
        Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. The room temperature and humidity should be always maintained at 15��~35�� and 35%~65% respectively.

        Asia Composite Materials (Thailand) Co.,Ltd.
        ADDRESS:7/347 moo 6 Mabyangporn,Pluakdaeng, Rayong 21140 Thailand(Head office)
        7/29 Moo 4 ,  Phananikhom,  Nikhomphatthana , Rayong,Thailand 21140(Branch00001)
        TEL: +66 038027400 FAX: +66 038027402   E-mail: fiberglass@wbo-acm.com